-32-
To answer a call when Handsfree Answerback is ON, refer to the
following table:
Phone state before
Direct Page arrives
To answer the Direct Page
Phone is idle, and MUTE
is flashing slowly
1. Check that MUTE is flashing rapidly.
2. Listen for the paging party.
3. Begin speaking.
4. Lift the handset if you wish to switch from a Handsfree
call to a handset call.
You are on a handset
call, and MUTE is
flashing slowly
1. Check that MUTE is ON solid.
2. Press MUTE. The light turns OFF and the Handsfree
microphone turns ON.
3. Speak to the paging party.
Note: Your handset microphone is still enabled.
You are on a muted
handset call, OR you
are on a Handsfree call
The party paging you receives a busy tone. Handsfree
Answerback does not interrupt your call.
Summary of Contents for 5224
Page 1: ...USER GUIDE SX 200 ICP USER GUIDE ...
Page 2: ...SX 200 ICP 3 0 ...
Page 8: ... 2 The 5212 IP Phone ...
Page 9: ... 3 The 5224 IP Phone ...