background image

-46- 

Call Logging (5224 IP Phone only) 

Call Logging keeps track of the names (if available) and telephone numbers 
of all your incoming calls or only those you missed. 

To program your phone to log your incoming calls: 

1. Press  

 (SUPERKEY).  

2. Press the No softkey until "Call Logging" appears.  
3. Press the Yes softkey.  
4. Press the Missed softkey to log missed calls only or the All softkey to log 

all calls.  

5. Press one softkey as follows: 

„

Press Intl to log calls from other extensions only  

„

Press Extl to log outside calls only  

„

Press Both to log internal and external calls.  

To turn off call logging: 

1. Press  

 (SUPERKEY).  

2. Press the No softkey until "Call Logging" appears.  
3. Press the Yes softkey.  
4. Press the Off softkey.  

To display the call log: 

1. Press the Callers feature key.  
2. Press the New softkey to display details for newly logged calls only, or 

the Old softkey to display details for previously logged calls. The display 
shows the caller's number. Press the Name or Num softkey to display 
the caller's name or number.  

3. If more than one call is logged, use the Next and Previous softkeys to 

display the others.  

To return a call in the call log: 

1. Display the call you want to return.  
2. DO one of the following: 

„

If the call is internal, press the Call softkey.  

„

If the call is external, dial 9 and then press the Call softkey.  

„

If the call is long distance, dial 91 and then press the Call softkey. 
You can dial up to three digits before pressing Call.  

Summary of Contents for 5224

































































Reviews: