11
Account
Enter the handset directory number (as
programmed on the MCD system).
Password
Enter the User PIN code that you programmed in
the “User and Device Configuration” form on the
MCD for this directory number. The entry in this
field must match the code that is entered in the
User PIN field. If the User PIN field for this
directory number is blank in the
“User and Device
Configuration” form then the entry in this field is
irrelevant.
Account Name
Enter the user name assigned to this handset
account.
Account Mailbox Name
Enter the handset directory number (as
programmed on the MCD system).
Account Mailbox Number
Enter the directory number of the voicemail auto
attendant.
Registrar
Enter the IP Address or FQDN of the host MCD
system.
Authentication Username
Enter the handset directory number (as
programmed on the MCD system)
DTMF Signaling
Set to
“RFC2833”
If users are unable to connect to voicemail or to
the Speak@Ease auto attendant application, try
using “Inband” then try “SIP INFO” as the
signaling method.
10. Click
Save
.
11. In the left frame of the configurator web interface, click
Telephony Settings
.
12. Under
Destination for incoming call
, check the boxes to specify where you want incoming calls
to ring for each account:
To have calls that are made to each account only ring the associated handset (default), complete
the grid as follows:
Summary of Contents for 5610
Page 1: ...MITEL COMMUNICATIONS DIRECTOR PLATFORM AND 5000 COMMUNICATIONS PLATFORM ...
Page 6: ......
Page 58: ...Configuration and Administration Guide 52 ...
Page 59: ......
