Mitel 5610 Configuration And Administration Manual Download

Page: 4 / 59

Configuration and Administration Guide

Options->Active calls ..................................................................................................................... 21

Options->VoIP Line ........................................................................................................................ 21

OK->Contacts ................................................................................................................................ 21

OK->Settings ................................................................................................................................. 21

OK->Messages .............................................................................................................................. 21

OK->Call Log ................................................................................................................................. 21

Network Configuration Notes ............................................................................................. 22

IP Configuration ............................................................................................................................. 22

File Transfer Protocol .................................................................................................................... 22

DHCP ............................................................................................................................................. 23

VLAN Tagging ................................................................................................................................ 23

SIP Configuration............................................................................................................... 24

SIP Server and SIP Accounts ........................................................................................................ 24

STUN, RPORT, SIP Port Settings ................................................................................................. 26

PIN Protection of Handset Menus ..................................................................................... 28

Registrations Administration .............................................................................................. 28

WEB Server Customization ............................................................................................... 29

Automatic DST (Daylight Saving Time) adjustment ........................................................... 30

Logs ................................................................................................................................... 32

SERVER BASED CONFIGURATION FILES ........................................................... 32

Handset Configuration File ................................................................................................ 35

Phonebook Configuration File ........................................................................................... 42

FEATURE SUPPORT .............................................................................................. 43

5610 Handset and IP DECT Stand Features ..................................................................... 43

IP DECT Stand LED Indicators ...................................................................................................... 44

Handset Registration ..................................................................................................................... 44

Two Line Support ........................................................................................................................... 44

Message Waiting Indication ........................................................................................................... 44

Supervised Transfer ...................................................................................................................... 45

Unsupervised Transfer .................................................................................................................. 45

Conference .................................................................................................................................... 45

Conference Split (End Conference) ............................................................................................... 45

Call Forwarding (Always, Busy, No Answer) ................................................................................. 46

Do Not Disturb ............................................................................................................................... 46

Call Swap ....................................................................................................................................... 46

Call Waiting .................................................................................................................................... 46

MCD Supported Features .................................................................................................. 46

Summary of Contents for 5610




























































Search results

Summary of Contents for 5610

Reviews:

Related manuals for 5610

Brands by name

Popular brands

Mitel 5610, Configuration And Administration Manual

Search results

Summary of Contents for 5610

Reviews:

Related manuals for 5610

Brands by name

Popular brands