Supplementary features
Mitel 622 DECT Phone
63
eud-1720/1.0 – R3.0 – 08.2015
Silent intrusion
Silent intrusion
is a variant of the
Intrusion
function and is used mainly in call centres.
Another user can intrude on your active call and listen in to your conversation without you
and your call party noticing. Unlike Intrusion you will receive neither a visual nor an acous-
tic signal.
This means you cannot reject Silent intrusion. The third user's microphone remains
switched off. He can however intrude on the call at any time by enabling his microphone
or pressing the
Intrusion
function key.
Your system administrator can allocate this function to a configurable key.
Free seating
You do not have your own workplace and share desk and phone with other employees.
Log in:
Free Seating lets you log in on a phone configured for that purpose. Once you are logged
in, your personal call lists, phone book and all your other personal settings and Hotkeys
are available to you immediately.
Log out:
To free up a phone, you need to log off again. To ensure a phone is not blocked for other
users if you forget to log off, your system administrator can set up a logoff process with an
automatic time limit:
• After a certain amount of time after login (e.g.after 6 hours and 30 minutes).
• At a certain time (e.g. 6.30pm)
Notes:
• Silent intrusion has to be enabled. Contact your system administrator for more informa-
tion.
• Silent intrusion may infringe on your national data protection provisions or be permitted
only under certain circumstances.
• If you intend to use this function notify your call party in advance.
<Phone number>
1. Enter the call number of the user you want.
2. Once the busy tone sounds, press key 4.
➔
Silent intrusion is activated.
Notes:
• You can only log in to a phone if no other user has yet logged in to that phone for free
seating purposes.
• You can only log on once to a Free Seating phone. The moment you log in to another
free seating phone, you are automatically logged off the original phone.
