Supplementary features
Mitel 622 DECT Phone
69
eud-1720/1.0 – R3.0 – 08.2015
Setting functions by remote control
This section explains how you can alter your phone’s settings even if you are not
directly at your phone.
You are not at your desk and want to set various functions on your phone from a different
phone.
You can activate/deactivate many of your phone's functions by remote control from a dif-
ferent phone.
The remote control is initiated using a special function code. You can then enter the func-
tion commands and function codes.
Hotline (for external users):
User needs help:
User presses the alarm button or directly dials the hotline destination
number.
➔
The connection with the Hotline number is set up.
Note:
Unlike the hotline feature (see chapter
used with a specifically configured Mitel Alarm Server.
<Function code>
Using remote control from a third-party phone:
1. Enter function code #06.
2. Enter your phone number.
3. Enter your PIN.
4. Enter the function code for activating/deactivating the function you
want.
Press the Call key.
➔
Acknowledgement tone sounds; function is activated/deactivated.
Note:
The default PIN setting "0000" is not accepted. First change the PIN as
described in chapter "Changing the User PIN", page 82 or use the func-
tion code *47 (see User Guide Function Codes on the
If you have forgotten your PIN, your system administrator can reset it to
the default setting.
