Phoning
Mitel 6863 SIP / Mitel 6865 SIP
33
eud-1663/1.2 – R4.0 SP1 – 01.2016
Automatic call waiting in case of internal user
You would like to talk to an internal user whose line is currently busy.
By using the function Automatic call waiting
1)
, this user in informed that
you would like to talk to him. When you use the call waiting function, the
user receives a call waiting tone (duration and frequency of the tone
depend on system settings) and your phone number or name appear on
their display. The user may accept or refuse your call.
Requirements:
• Your system administrator must authorise you for the function call wait-
ing in the MiVoice Office 400 communication system.
• The internal user must not have blocked the function call waiting on
their phone (see chapter "Activating protection against call types",
page 81 for configuration).
Business calls:
1. Enter function code #36 for a business call.
2. Enter your internal phone number.
3. Enter your PIN.
4. Enter the internal or external phone number with the exchange access digit.
Pick up the handset.
➔
The phone number displayed is dialled.
Note:
When you hang up, dialling by name and your private phone book remain avail-
able for a whole minute so you can make another call.
Private calls:
1. Enter function code #46 for a private call.
2. Enter your internal phone number.
3. Enter your PIN.
4. Enter the external call number directly, without the exchange access digit.
5. Pick up the handset.
➔
The phone is now enabled; the external user is called.
Note:
The default PIN setting ‘0000’ is not accepted (for more information on the PIN,
see chapter "Changing the PIN", page 79).
1) from MiVoice Office 400 communication server software version R4.0 SP1
onwards
