Mitel 6867i Premium Administrator'S Manual Download

Page: 222 / 1042

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide

4-69

11.

Press

Done

to save the changes.

12.

Select

Password

to enter the password used to register the IP phone with the SIP proxy

13.

Press

Done

(3 times) to save the changes.

14.

Select

Restart.

For the 6867i/6869i:

Press

on the phone to enter the Options List.

Press the

Advanced

softkey.

Enter the Administrator password using the keypad. Default is “

22222

”.

Select

SIP > User

In the

User Name

field, enter the username that appears in the name field of the SIP URI.

This user name is also used for registering the phone at the registrar.

In the

Display Name

field, enter the name used in the display name field of the "From SIP"

header.

In the

Screen Name

field, enter the name to display on the idle screen.

In the

Auth. Name

field, enter the authorization name used in the username field of the

Authorization header field of the SIP REGISTER request.

In the

Password

field,

enter the password used to register the IP phone with the SIP proxy

10.

Press the

Save

softkey.

11.

Restart the phone for the changes to take affect.

For the 6873i:

Press

on the phone to enter the Options List.

Press the

Advanced

softkey.

Enter the Administrator password and press the blue Enter key. Default is “

22222

”.

Note:

The IP phones accept numeric passwords only.

Note:

The session prompts you to restart the IP phone to apply the configuration

settings.

Note:

The IP phones allow usernames containing dots (“.”). You can also enter the

same user name for different registrar and proxy IP addresses

Note:

The IP phones accept numeric passwords only.

Summary of Contents for 6867i Premium



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6867i Premium

Reviews:

Related manuals for 6867i Premium

Brands by name

Popular brands

Mitel 6867i Premium, Administrator'S Manual

Search results

Summary of Contents for 6867i Premium

Reviews:

Related manuals for 6867i Premium

Brands by name

Popular brands