Mitel 6867i Premium Administrator'S Manual Download

Page: 528 / 1042

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide

5-267

Enabling/Disabling Directories and Renaming Labels

Administrators have the option of enabling or disabling the respective directories on the phone

as well as changing the default folder labels. These actions can be performed using the
configuration files or through the phone’s UI.

Enabling/Disabling Directories and Renaming Labels Using the Configuration Files

Use the following procedures to enable/disable directories and rename directory folder labels.

For specific parameters you can set in the configuration files see Appendix A, the section,

“Enhanced Directory Settings”

page A-126

Enabling/Disabling Directories and Renaming Labels Using the Phone UI

Use the following procedure on the phone’s UI to enable/disable directories and rename
directory folder labels.

For the 6863i/6865i:

Press the

key on the phone to enter the Option List.

Select

Directory

Select

External Sources.

Navigate to the Directory Source you wish to enable/disable (e.g. LDAP) and press the

Enter

key.

Navigate to the

State

setting and press the

Enter

key.

Select a state (

OFF

Press the

key or select

Set.

Your selection will be immediately applied to the phone.

Navigate to the

Label

setting and press the

Enter

key.

Using the dialpad keys, enter in a name for the respective directory folder.

10.

Select

Set.

Your selection will be immediately applied to the phone.

For the 6867i/6869i:

Press

on the phone to enter the Options List.

CONFIGURATION FILES

IP PHONE UI

Note:

CSV 1 and 2 are enabled by default. All other Directory sources are disabled

by default.

Summary of Contents for 6867i Premium



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6867i Premium

Reviews:

Related manuals for 6867i Premium

Brands by name

Popular brands

Mitel 6867i Premium, Administrator'S Manual

Search results

Summary of Contents for 6867i Premium

Reviews:

Related manuals for 6867i Premium

Brands by name

Popular brands