Mitel 6867i Premium Administrator'S Manual Download

Page: 83 / 1042

Administrator Level Options

3-13

RESTARTING YOUR PHONE

As System Administrator, there may be times when you need to restart a phone. The Restart

option allows you reboot the phone when required. A reset may be necessary when:

•

There is a change in your network,

•

To re-load modified configuration files,

•

If the settings for the IP phone on the IP PBX system have been modified.

You can restart the phone using the IP Phone UI or the Mitel Web UI.

RESTARTING THE PHONE USING THE IP PHONE U

For the 6863i/6865i:

Press

on the phone to enter the Options List.

Select

Restart Phone

Press

to confirm.

For the 6867i/6869i:

Press

on the phone to enter the Options List.

Navigate to the

Restart

option and press the

button or

Select

softkey. A “Restart

Phone?” prompt displays.

Select

Yes

using the

button to restart the phone. Press

using the

button to

cancel the restart function.

For the 6873i:

Press

on the phone to enter the Options List.

Press the

Restart

icon. A “Restart Phone?” prompt displays.

Press

Yes

to restart the phone. Press

to cancel the restart function.

Note:

The IP Phones can register with multiple server using the same user name. So

the SIP Status information on the Status screen may display the same account with
different registrar and proxy IP addresses.

Note:

The SIP phones unregister all accounts before executing a reboot.

IP PHONE UI

Note:

To cancel the Restart, press the

key.

Note:

If required, swipe left on the screen to navigate to the second page of options.

Summary of Contents for 6867i Premium



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6867i Premium

Reviews:

Related manuals for 6867i Premium

Brands by name

Popular brands

Mitel 6867i Premium, Administrator'S Manual

Search results

Summary of Contents for 6867i Premium

Reviews:

Related manuals for 6867i Premium

Brands by name

Popular brands