Configuration
184
Aastra 470 as of R3.2
syd-0337/1.6 – R3.2 – 09.2014
sends it the connection parameters. The communication server now sets up a se-
cure connection to the SRM server which switches together them with the connec-
tion to the SRM agent.
See also:
You can find instructions on how to set up Secure IP Remote Manage-
ment in the WebAdmin help on the
IP remote management (SRM)
(
=mw
).
5. 3
User access control
Access to the configuration is password-protected. Any user wanting to log in to a
communication server is prompted for his user name and password (access data).
5. 3. 1
User accounts and authorization profiles
A user's authorizations are regulated by authorization profiles, which are assigned
to the user accounts.
5. 3. 1. 1
User accounts
Default user account for initial access
The default user account (
admin
) and several authorization profiles are created
when a new communication server is opened or after a first start. The default user
account is linked with the authorization profile
Administrator
. This authorization
profile is assigned the administration rights for the
User access control
for
Audio ser-
vices
and for WebAdmin at the
Administrator
authorisation level.
The required user accounts and authorization profiles can be set up using the de-
fault user account.
To access the default user account (
Default User Account
) enter the following:
Tab. 83
Standard user account and standard password
Note:
To prevent unauthorised access to the communication server, it is neces-
sary to modify the default password during first access. For password
selection and input, see
User name
admin
Password
33aastra
