Phoning
Mitel 6867 SIP / Mitel 6869 SIP
31
eud-1664/1.3 – R5.0 – 06.2017
Making calls
This section explains how to set your calls.
Answering, ending or rejecting a call
Answering a call:
The phone rings and the message LED and line key
LED flash. If the caller's phone number is received, it is shown on the dis-
play. If the phone number or user picture is stored in the private phone
book or in the MiVoice Office 400 communication system, the display also
shows the corresponding name or the corresponding picture.
Open listening:
With the open listening mode function,the loudspeaker is
activated in addition to the handset so that other people in the room can
listen to the call.
Rejecting a call:
As long as you have not picked up a call, you can reject
it during the ringing phase.
Answering a call with the handset:
Pick up the handset.
Answer a call with the line key
Press the line key and pick up the handset.
Answering a call with the softkey
Press the
Answer
softkey and pick up the handset.
Open listening during a call:
Activate: Press the loudspeaker/headset key.
Deactivate: Press the loudspeaker/headset key again.
Ending a call in open listening mode:
Press the loudspeaker/headset key and put down the handset.
Note:
If you merely replace the handset, the phone switches to the hands-free mode.
Ending a call:
Put the handset on-hook or press the End key.
Rejecting a call:
Press the End key or the
Ignore
softkey during the ringing phase.
➔
The connection is rejected and, depending on the system configuration, the
caller either hears the busy tone or is forwarded to a preconfigured destina-
tion.
