46
Mitel 6867 SIP / Mitel 6869 SIP
eud-1664/1.3 – R5.0 – 06.2017
Phoning
Making a conference call
You want to make a conference call.
A conference call allows you to connect three call parties. From a confer-
ence call/call, you can initiate an enquiry call to someone else. You can
broker between the conference participants and the enquiry call party.
Depending on the system configuration, a conference call can consist of
up to 6 conference participants. You can hold a conference call with inter-
nal and external users.
Note:
If you have a user account for the Self Service Portal, you can create con-
ference rooms there (see chapter "MiVoice Office 400 Self Service Portal",
page 9).
Terminating a call:
Press the
Drop
softkey or the End key.
Recommence conversation with the first call party:
Press the
Pick up
softkey or the flashing line key.
Mitel 6867 SIP:
Setting up a conference (you are connected):
1. Press the Conference key.
2. Enter the phone number of the second conference call party.
3. Press the
Dial
softkey.
➔
The conference party answers the call.
4. Press the Conference key.
Notes:
• You can also set up a conference by pressing the busy lamp field keys to
which you have saved the call party.
• You can change the procedure by first starting an enquiry call before you set
up a conference.
Leaving a conference call:
Press the
Drop
softkey, put the handset on-hook or press the End key.
➔
The other conference parties remain in the call.
