MiVoice 5320 IP Phone User Guide
3
Ring/Message Indicators
Flashing rapidly
Your phone is ringing
Flashing slowly
A message or callback message is waiting at your phone
On
Your phone is ringing another phone
Off
Your phone is idle, or you are on a call
For Users on Resilient Mitel Communications Director (MCD) Systems
If during a call, you hear a beep repeated every 20 seconds it means that your phone is switching
to a secondary MCD system. The call continues and there is a change in the operation of some
keys and features on your phone. Normal operation resumes when your phone switches back to
the primary system. If your phone is idle and switched to the secondary system, you'll see a
flashing rectangle on the display. The rectangle remains until the switch to the primary system is
complete.
If the phone fails over to the secondary ICP, you have access to your mailbox on the secondary
ICP only if your Administrator has programmed a mailbox for you.
Notes:
1. The mailbox on the secondary ICP will not contain the same messages as the mailboxes on the
primary ICP. Any preferences that are voice mail related are not carried from the primary ICP to the
secondary ICP. These preferences must be set on both ICPs.
2. The Settings application does not support resiliency. Your logs, contact information and any Settings
on the primary ICP will not be carried from the primary ICP to the secondary ICP.
