208
(4) Check your WLAN settings
The following procedure assumes that the WLAN has been set up with
WPA security.
If a different security configuration has been set up, refer back to
Section 10 Wireless Setup/Security
(a)
Enter the Mitel 1000 Main menu
•
Select Wireless Settings/Security
In General Settings
Yes
Go to
(c)
(b)
Is Wireless
network enabled ?
No
•
Click Enable or disable the wireless
network here …
•
Select Enable
•
Click Next
•
Go to
(c)
(c)
Make a note of the Network Name
(d)
Select
Allow Mitel 1000 to select a channel
(e)
Select
Wi-Fi Protected Access (WPA)
on the wireless network
Enable SSID Broadcast
(f)
Re-enter the Pass Phrase and
make a note of it
(g)
Select
Allow any Wireless PCs to connect
Confirm changes
Restart the Mitel 1000
(h)
Is the Wireless
LED on the Micro
Green ?
Yes
Go to
(1d)
No
Go to
(5) Check your Wireless PC
settings