69
Programming Additional System Options
Using a Doorphone
You can equip your Mitel 1000 with a Doorphone. The Doorphone has a
button which, when pressed, rings at programmed extensions, and has a
microphone/speaker for communication. With a Doorphone fitted in your
reception area, anyone visiting your premises can call when they arrive and
you can speak to them before you let them in.
Your Mitel 1000 also features a Doorstrike relay output, which can be used to
operate a Doorstrike mechanism, to allow you open the door from your
extension. You must purchase the Doorstrike mechanism yourself and
arrange for a qualified electrician to install it.
For configuration via the web interface, see page 97.
For configuration via the Featurephone interface, see page 176.
Answering a Doorphone call
You can answer a Doorphone call if your extension is programmed to ring
when someone calls at the Doorphone.
To answer a doorphone call, lift the handset and speak. There is no code to
dial.
An extension cannot make a call to a doorphone
To open a door using the Doorstrike
When your extension is ringing with a Doorphone call, and you have a
Doorstrike mechanism installed, the option ‘Open the door’ will be displayed.
Select
‘Open the Door’.
The Doorstrike relay will operate and the call to the
Doorphone will be disconnected.
From a standard telephone, the code is Hookflash731 if you are on a call and
731 if you are not.
External Forwarding Options
This allows you to decide if external callers or external and internal callers to
your extension are forwarded externally. It also allows extensions to be
prohibited from activating an external forwarding.
For configuration via the web interface, see page 102.
Note
The Forward on no answer timer is set at 18 seconds in default.
This timer can be changed. See Page 111 for changing it via the
Management interface and Page 183 to change it via the
programming systemphone
For configuration via the Featurephone interface, see page 176.