manualshive.com logo in svg

Mitel SX-2000 EL, Information Manual

Discover everything you need to know about the Mitel SX-2000 EL with our comprehensive Information Manual. This essential manual is available for free download from 88.208.23.73:8080, equipping you with all the necessary insights to maximize your experience with this cutting-edge product. Find it now and elevate your communication capabilities.

Share
Download
background image

Feature Description

50003510

Revision A

133

performance needed to ensure satisfaction in the most demanding telemarketing environments. 
For maximum efficiency, all ACD personnel use SUPERSET display telephones programmed 
with special displays and softkeys.The SUPERSET display telephones are SUPERSET420, 
SUPERSET 430, SUPERSET 4015, SUPERSET4025, and SUPERSET 4150 telephones. The 
displays provide call status and progress messages; the softkeys give single-button selection 
of ACD features.

ACD - Path

The heart of the ACD TELEMARKETER feature is the ACD path, an innovative call routing 
design that guides incoming calls through the system. The path defines all information required 
for each type of call including how the system is to handle callers placed in a queue to wait for 
an agent. With 99 ACD paths in the system, customized routing is available to every conceivable 
type of incoming call. This centralization of routing parameters gives users unmatched flexibility 
when programming and adding new features.

Priority designations of 1 to 99 may be assigned to each path, allowing calls arriving on high 
priority paths to move directly to the front of the call queues. Higher priority paths are also given 
special treatment when placed in overflow queues. Lower priority calls in the same overflow 
queue maintain their position in relation to each other, but the system places them behind 
priority calls. 

ACD - Positions   

The ACD TELEMARKETER feature package structures the personnel handling ACD calls into 
a hierarchy of ACD positions.   The ACD package supports three types of positions: senior 
supervisors, supervisors, and agents. ACD calls entering the system usually terminate on an 
agent position. Agents handling similar types of calls are arranged in agent groups. Supervisors 
and Senior Supervisors monitor agent and system performance, but do not handle ACD calls.

ACD - Displays

The ACD TELEMARKETER feature includes real-time displays via standard asynchronous 
datasets and ASCII terminals. Thirteen displays encompass every area of ACD operation. Path, 
group, and agent information is displayed in three categories: statistical analysis, current 
activity, and programming information. A system activity display provides a general overview 
of the status of the ACD system, including the number of agents logged in, the number of calls 
in the system, and general statistics on agent performance. Up to four users can access the 
password protected information simultaneously. Softkeys are provided for easy access to 
specific displays or for requesting printouts.

ACD - Longest Idle Agent

If multiple agents are free when an ACD call is presented to a group, the system sends the call 
to the longest idle agent. To select the longest idle agent, the system gives a number to the 
first agent to finish an ACD call. The next agent to finish an ACD call is given the next higher 
number, and so on. When a call arrives at the group, the system sends the call to the agent 
with the lowest number.

Summary of Contents for SX-2000 EL



































































































































































































































































Reviews:

No comments

Related manuals for SX-2000 EL

Water Factory Systems N4000 Series Installation, Operation And Maintenance Manual preview
N4000 Series
Brand: Water Factory Systems Pages: 15
NEC UX5000 Adjustment Instructions preview
UX5000
Brand: NEC Pages: 4
NEC UX5000 Feature Handbook preview
UX5000
Brand: NEC Pages: 180
NEC SV8300 Quick Reference preview
SV8300
Brand: NEC Pages: 2
NEC Xen Topaz User Manual preview
Xen Topaz
Brand: NEC Pages: 6
NEC SV8300 Manual preview
SV8300
Brand: NEC Pages: 54
NEC DT330 Quick Reference Card preview
DT330
Brand: NEC Pages: 2
NEC ELECTRA ELITE IPK II General Description Manual preview
ELECTRA ELITE IPK II
Brand: NEC Pages: 174
NEC DS2000 IntraMail Hardware Manual preview
DS2000 IntraMail
Brand: NEC Pages: 78
NEC DS2000 IntraMail Quick Reference Manual preview
DS2000 IntraMail
Brand: NEC Pages: 6
NEC Xen Master System Hardware Manual preview
Xen Master
Brand: NEC Pages: 268
Unify OpenStage 15 Manual preview
OpenStage 15
Brand: Unify Pages: 19
Bang & Olufsen BeoSound 4 Supplement Manual preview
BeoSound 4
Brand: Bang & Olufsen Pages: 6
Bang & Olufsen BeoSound 5 Encore Manual preview
BeoSound 5 Encore
Brand: Bang & Olufsen Pages: 25
Bang & Olufsen BeoCenter 2 Manual preview
BeoCenter 2
Brand: Bang & Olufsen Pages: 28
Magnavox MME239 - Micro DVD Home Theater System User Manual preview
MME239 - Micro DVD Home Theater System
Brand: Magnavox Pages: 39
QFX M-336 Owner'S Manual preview
M-336
Brand: QFX Pages: 5
Yamaha CBX-D5 Troubleshooting Manual preview
CBX-D5
Brand: Yamaha Pages: 4

Brands by name

Popular brands

Load more brands