manualshive.com logo in svg

Mitel SX-2000 EL, Information Manual

Discover everything you need to know about the Mitel SX-2000 EL with our comprehensive Information Manual. This essential manual is available for free download from 88.208.23.73:8080, equipping you with all the necessary insights to maximize your experience with this cutting-edge product. Find it now and elevate your communication capabilities.

Share
Download
background image

SX-200 General Information Guide

222

Revision A

50003510

SX-200 SPINE CLASS Receivers

The  table below can be used as a guideline to determine CLASS receiver requirements. This 
receiver provisioning is based at the SX-200 SPINE level. 

If a CLASS receiver is not available, the call is not dropped, although the calling line information 
is lost. Users may determine their own level of urgency on this calling line information when 
determining their receiver requirements.

2.

Determine the expected traffic level for 
your system and select the appropriate 
divisor:

• very heavy traffic (ACD / internal

auto attendant)15

• heavy traffic 20

• medium traffic25

• light traffic

30

Divisor = ______

3.

Divide the total ports from step 1 by the 
divisor in step 2. Round the answer up to 
the next whole number. This is the total 
number of DTMF receivers required. 

Total DTMF receivers 
required = ______

4.

If SPINE bays are present, determine the 
number of available DTMF (non-CLASS) 
receivers (set by System Options 61 - 67) 
on the SPINE Control Modules. 

Available SPINE 
DTMF receivers = ______

5.

Add the number of available SPINE 
DTMF receivers (step 4) to the number of 
receivers on an SX-200 EL or SX-200 ML 
MCC (set by System Option 68) to 
determine the total number of already 
available receivers.

Total available DTMF
 receivers = ______

6.

Subtract the total available DTMF 
receivers (step 5) from the total DTMF 
receivers required (step 3) to determine 
the quantity of additional DTMF receivers 
required.

Additional DTMF receivers 
required = ______

7.

Divide the additional receiver requirement 
(step 6) by 4 (round up to the next whole 
number) to determine the number of 
receiver modules required. 

DTMF modules required = ______

Note: 

Receiver modules require a 

Universal Card which holds up to 4 
modules.

Calculating Receiver Requirements (continued) 

Step

Calculation

Result

Page 2 of 2

Summary of Contents for SX-2000 EL



































































































































































































































































Reviews:

No comments

Related manuals for SX-2000 EL

Panasonic 308 Quick User Manual preview
308
Brand: Panasonic Pages: 2
Ace ACE.BOIL Instructions Manual preview
ACE.BOIL
Brand: Ace Pages: 13
Yealink SIP-T57W Manual preview
SIP-T57W
Brand: Yealink Pages: 8
Yealink T41S Quick Reference Manual preview
T41S
Brand: Yealink Pages: 6
Yealink T33G Quick Start Manual preview
T33G
Brand: Yealink Pages: 9
Uniden Extend-A-Phone Operating Manual preview
Extend-A-Phone
Brand: Uniden Pages: 51
STARPLUS Starplus DHS-L Technical Manual preview
Starplus DHS-L
Brand: STARPLUS Pages: 294
Uniden EZAI2997 Series Manual D'Utilisation preview
EZAI2997 Series
Brand: Uniden Pages: 36
Everpure 2JT Cartridge EV9608-10 Specification Sheet preview
2JT Cartridge EV9608-10
Brand: Everpure Pages: 2
Xblue Networks Xplus100 User Manual preview
Xplus100
Brand: Xblue Networks Pages: 121
NEC IP3NA-BCH User Manual preview
IP3NA-BCH
Brand: NEC Pages: 57
Focal SCALA UTOPIA III EVO User Manual preview
SCALA UTOPIA III EVO
Brand: Focal Pages: 52
Rinnai Prestige Close Coupled Systems Operation & Installation Manual preview
Prestige Close Coupled Systems
Brand: Rinnai Pages: 48
BT 4000 Classic Quick Setup And User Manual preview
4000 Classic
Brand: BT Pages: 64
Uniden D32808-7 (French) Manual D'Utilisation preview
D32808-7
Brand: Uniden Pages: 32
DAINCUBE DTP7H-D Hardware User Manual preview
DTP7H-D
Brand: DAINCUBE Pages: 35
Bang & Olufsen BEOCOM 5 Manual preview
BEOCOM 5
Brand: Bang & Olufsen Pages: 76
AT&T CL81101 User Manual preview
CL81101
Brand: AT&T Pages: 39

Brands by name

Popular brands

Load more brands