background image

SX-200 General Information Guide

28

Revision A

50003510

Mitel Networks 6100 Contact Center Solutions

Mitel Networks 6100 Contact Center Solutions (6100 CCS) include automated call distribution, 
interactive voice response, computer-telephony integration, real-time workforce management, 
intelligent in-queue messaging, email, web chat, fax routing and queuing, and comprehensive 
reporting capabilities. The 6100 CCS product has a suite of applications that enable customers 
to maximize the efficiency of their call center. 

The 6100 CCS product incorporates

Mitel Networks 6110 Contact Center Management

Mitel Networks  6115 Interactive Contact Center

Mitel Networks  6120 Contact Center Scheduling

Mitel Networks  6150 Multimedia Contact Center

Mitel Networks 6160 Intelligent Queue.

Mitel Networks 6110 Contact Center Management is an application that manages ACD 
information. The application uses a familiar Microsoft Excel and Microsoft Internet Explorer 
interface. Call Center managers can log on to any PC to run reports, monitor real time activities, 
forecast the number of agents required, and perform numerous management functions over 
the network.

Mitel Networks 6115 Interactive Contact Center enables supervisors to alter the way calls are 
handled in the call center. 

Mitel Networks 6120 Contact Center Scheduling works in conjunction with the Mitel Networks 
6110 Contact Center Management application to optimize staffing levels to match business 
needs.

Mitel Networks 6150 Multimedia Contact Center works with Microsoft Exchange and Outlook 
to provide Contact Centers with automatic e-mail distribution. E-mails are sent to one address, 
and the application manages the distribution based on agent availability and skill level. The 
process is similar to the way that Automatic Call Distribution works for telephone calls. 

Mitel Networks 6160 Intelligent Queue enhances Mitel Networks 6110 Contact Center 
Management. 6160 IQ is an intelligent recorded announcement device (RAD) that allows call 
centers to customize which messages callers will hear based on the time, date, and/or number 
of callers in the queue. The application is managed through a web-based interface with .WAV 
file recordings. 

Summary of Contents for SX-2000 EL



































































































































































































































































Reviews: