manualshive.com logo in svg

Mitel SX-2000 EL, Information Manual

Discover everything you need to know about the Mitel SX-2000 EL with our comprehensive Information Manual. This essential manual is available for free download from 88.208.23.73:8080, equipping you with all the necessary insights to maximize your experience with this cutting-edge product. Find it now and elevate your communication capabilities.

Share
Download
background image

Configuration

50003510

Revision A

51

SX-200 RM Peripheral Cabinet

The SX-200 RM peripheral cabinet supports a Bay Power Supply, a Bay Control card,  a PRI 
card, a T1 card, a Peripheral FIM Carrier II card or a Peripheral Interface Module Carrier card, 
and up to eight Peripheral Interface Cards. The peripheral cabinet is the same cabinet as the 
SX-200 EL control cabinet.

Components of the peripheral cabinet include:

Bay Control Card

 - interfaces the peripheral cards with the Main Control Card III in the Control 

Cabinet. The Bay Control Card (BCC) comes in two variants: BCC II and BCC III. The BCC III 
has more processing power that is required for ISDN connectivity (BRI and PRI cards). The 
BCC III in a peripheral cabinet also supports a DSP Module (Single), a T1/E1 Module, a FIM 
II or a CIM. The BCC III requires an SX-200 ELx cabinet.

DSP Module (Single)

 - provides CLASS generators for ONS/CLASS sets and provides 

conference bridges for Record a Call. This DSP module also provides 16 DTMF receivers thus 
eliminating the need for a Universal Card. The DSP module sits on the BCC III. For CLASS 
functionality, the DSP module must be in the same cabinet as the ONS/CLASS Line card. For 
the Record a Call conference bridges, the DSP module must be in the same cabinet as the 
user’s circuit.

T1/E1 Module

 - contains two digital trunk connections which can be configured as either having 

a T1 style interface (1.544Mbits/s) or an E1 style interface (2.048Mbits/s).The SX-200 only 
uses the T1 style interface.The two T1 connections, also referred to as circuits or links, support 
48 channels.The T1/E1 module has an Extended Superframe (ESF) and has built in Channel 
Service Unit (CSU) functionality. The T1/E1 module is installed on the PRI card or on the BCC III.

FIM II

 - connects the peripheral cabinet or the ISDN bay (PRI card) to the FIM II in the main 

control cabinet. The FIM II is installed on the PRI card, Peripheral Interface Module Carrier 
card, or on the Bay Control Card III in a peripheral cabinet. The FIM II has three variants: 1 km, 
5 km, and 14 km. The fiber interface module must be the same type at both ends (main control 
cabinet and peripheral cabinet).

Copper Interface Module (CIM)

 - supports the transmission of voice and data signals over 

copper cables that provide connectivity between the main control cabinet and the peripheral 
cabinets. The CIM uses a twisted pair interface with standard Category 5 cable. The CIM is 
similar to the FIM in the way that it provides 3 ST links. In a peripheral cabinet, the CIM plugs 
onto the BCC III, Peripheral Interface Module Carrier card, or the PRI card. The CIM supports 
a minimum distance of ten meters between cabinets. The copper interface modules are ideal 
for a co-located system.

PRI Card

 - provides one or two links of ISDN connectivity with the T1/E1 module that is installed 

on the PRI card.The PRI card requires LIGHTWARE 17 Release 4.0 or greater software and 
a SX-200 ELx  cabinet (PN 9109-600-002-NA). The PRI card also holds a FIM II or a CIM. The 
FIM II or CIM connects the PRI card bay to the interface module in the main control cabinet.The 
SX-200 EL peripheral cabinet can hold up to 2 PRI cards. 

Note: 

The BCC III, Peripheral Interface Module Carrier card, and  the PRI card require 

the SX-200 ELx cabinet. These cards support a FIM II or a CIM to connect the bay  to 
the control cabinet.

Summary of Contents for SX-2000 EL



































































































































































































































































Reviews:

No comments

Related manuals for SX-2000 EL

GAI-Tronics 10959-207 User Manual preview
10959-207
Brand: GAI-Tronics Pages: 22
Tokai LRD-3050W Instruction Manual preview
LRD-3050W
Brand: Tokai Pages: 20
Elkay EZH2O LZWS-LRPBM28K Installation Instructions preview
EZH2O LZWS-LRPBM28K
Brand: Elkay Pages: 4
Medion LIFE P64014 User Manual preview
LIFE P64014
Brand: Medion Pages: 220
Goodmans MICRO1470DABI User Manual preview
MICRO1470DABI
Brand: Goodmans Pages: 22
Salus SG888ZB System Manual preview
SG888ZB
Brand: Salus Pages: 76
ATL Product Berkshire 400 Plus User Manual preview
Berkshire 400 Plus
Brand: ATL Product Pages: 4
Gigaset A39H User Manual preview
A39H
Brand: Gigaset Pages: 15
Uniden XCI-660 Instruction Manual preview
XCI-660
Brand: Uniden Pages: 52
Uniden DECT1725 Series Owner'S Manual preview
DECT1725 Series
Brand: Uniden Pages: 44
Northland V-TECH VSP600 Manual preview
V-TECH VSP600
Brand: Northland Pages: 7
Bogen NEARSCAPES 4.1 Manual preview
NEARSCAPES 4.1
Brand: Bogen Pages: 2
Agilent Technologies OmniBER J7230A Installation And Verification Manual preview
OmniBER J7230A
Brand: Agilent Technologies Pages: 174
JabloCom Essence GDP-06i Quick Start Manual preview
Essence GDP-06i
Brand: JabloCom Pages: 8
Topcom Butler E400 User Manual preview
Butler E400
Brand: Topcom Pages: 296
Forge Electronics COMBO MK 3 Manual preview
COMBO MK 3
Brand: Forge Electronics Pages: 10
Clearaudio Smart Phono H V2 User Manual preview
Smart Phono H V2
Brand: Clearaudio Pages: 3
Geemarc ClearSound CC40 User Manual preview
ClearSound CC40
Brand: Geemarc Pages: 24

Brands by name

Popular brands

Load more brands