5/34
ENGLISH
7. Our company declares that the statical calculations for the Mitkotent Premium in
sizes 3 × 3 m, 3 × 4,5 m, 3 × 6 m, Octa Basic in sizes 3 × 3 m, 3 × 4,5 m and Octa
Pro in sizes 4 × 4 m, 4 × 6 m, 4 × 8 m have been carried out according to the
PN-EN 13782:2015-2007 – „Temporary objects – Tents – Safety” norm (original
calculations available at the Manufacturer). The tents may be used with wind up
to 28 m/s (100 km/h) provided it is protected against wind gusts as described in
tables no. 1. During stronger wind, it is recommended in all cases to disassemble
the tent (first remove the wall and then fold the roof). Mechanical damage
resulting from failure to follow the above recommendations are not covered by
the warranty. At wind speeds of 50 km/h < 100 km/h, the Mitkotent Premium in
size 3 × 6 m and Octa Pro in size 4 × 8 m must be secured by placing, on middle
legs, guy rope at 1 m height and anchor it at an angle of 45 degrees.
Fig. 1. Mitkotent Premium 3 × 6 m and Octa Pro 4 × 8 m tents lines mounting
8. Mitkotents Premium in sizes 3 × 3 m, 3 × 4.5 m, 3 x 6 m and Octa Pro in sizes
3 × 3 m, 3 × 4.5 m, 3 x 6 m, 4 × 4 m, 4 × 6 m, 4 × 8 m with unusual structures,
i.e. with height increased by max 0,5 m. Tent may be used with wind up to
14 m/s (50 km/h) provided it is protected against wind gusts as described in
table no. 2. During stronger wind, it is recommended in all cases to disassemble
the tent (first remove the wall and then fold the roof). Mechanical damage
resulting from failure to follow the above recommendations are not covered
by the warranty.
Summary of Contents for MITKOTENT CLASSIC
