background image

 

 

TAKING CARE OF WARNING LABELS 
 

 

Always keep warning labels clean and free of scratches, which might make them illegible or difficult to 
read. If the warning labels provided with your grass trimmer become damaged, peel off, or otherwise 
become illegible or difficult to read, order new labels from the authorised servicing dealer and replace 
the damaged labels.    When applying new labels, first wipe away any dirt and dry the surface before 
applying the new label in the same place as the original label.   

 

WARNINGS IN THE MANUAL 

 

 

 

 

This mark indicates instructions which must be followed in order to prevent accidents which could lead 
to serious bodily injury or death. 

 

 

 

 

This mark indicates instructions which must be followed, or it leads to mechanical failure, breakdown, or 
damage. 

 

 

 

 

This mark indicates hints or useful directions in the use of the product. 

 
 

EXPLANATION OF SYMBOLS ON THE MACHINE 
 

 

For safe operation and maintenance, symbols are carved in relief on the machine: 

 
 

 

                             

FUEL TANK 

                                          Fuel tank 2 stroke mix 
                                          Position: Fuel cap 

   

 

                             

CHOKE OPERATION 

                     Starting mode when the engine is hot (choke off). 

Position: Air cleaner cover. 
 

 

 

 

                             Starting mode when the engine is cold (choke on). 

Position: Air cleaner cover.             
 
 

                             
 
 
 
 
 

   

 
 

 
 

  

  

Summary of Contents for 251C PETROL GRASS TRIMMER





















Reviews: