415CSX PREMIUM Chainsaw
25
Original Instructions Version July 18
415CSX_030718
Anti Freezing Window
Operating chain saws in temperatures of -25°C – 0°C at times of high humidity may result
in ice forming within the carburetor, and this in turn may cause the output power of the
engine to be reduced or for the engine to fail to operate smoothly.
This product has accordingly been designed with an anti-freezing window on the top
right of the carburettor supporter to allow warm air to be supplied to the carburettor
chamber and to thereby prevent icing from occurring.
•
Under normal circumstances the anti-freezing window should be set in the
close mode.
•
However when the possibility exists that icing may occur, the anti-freezing
window should be set in the open mode before use.
Continuing to use the product in the anti-freezing mode even when temperatures have
risen and returned to normal, may result in the engine failing to start properly or in the engine
failing to operate at its normal speed, and for this reason you should always be
sure to set the anti-freezing window to the close mode if there is no danger of icing
occurring.
1.
Remove cylinder cover and air filter
2.
Pinch the anti-freezing window (5) and pull it out, then turn it over and push it into the
carburettor supporter again.
3.
Reinstall the air filter and cylinder shield and lock it securely.
