background image

760BPX Premium 

Original Instructions Version June 16

760BPX_2805161

7

Safety Precautions

Read  this  Owner/Operator  Manual  carefully.  Be  sure  you  understand  how  to  operate  this        
product properly before you use it. Failure to do so could result in serious injury.

Keep this manual safe so that you may refer to it later, whenever any questions arise. Also note 
that you are able to contact your authorised MITOX® dealer for assistance.

Always include this manual when selling, lending or otherwise transferring ownership of this 
product.

This product is equipped with an extremely sharp blade/blades, always wear sturdy gloves 
when handling the blades and fit any safety guards when not in use.

This product is equipped with an extremely sharp blade/blades, always wear sturdy gloves when 
handling the blades and fit any safety guards when not in use.

When using this product for the first time, take it to a wide, clear, open space, start the engine 
and practice handling it until you are sure that you will be able to handle it competently in actual 
operation.

You  should  never  use  this  product  when  under  the  influence  of  alcohol,  suffering  from                          
exhaustion or lack of sleep, suffering from drowsiness as a result of having taken medication, 
or at any other time when your judgement might be impaired or that you might not be able to 
operate it properly and in a safe manner.

Never allow children or anyone unable to fully understand the directions given in this manual to 
use this product.

When planning your work schedule, allow plenty of time to perform the work and allow plenty 
of time for rest.  Limit the amount of time you continuously use this product to 30-40 minutes 
per session and take 10-20 minutes of rest between work sessions. Also, try to keep the total 
amount of work performed in a single day to 2 hours. 

Never run the engine indoors as the exhaust gases contain harmful carbon monoxide.

Never use this product in the conditions described below:

When the ground is slippery or when other conditions exist which might make it difficult to  
maintain a steady posture while using this product.

At night, at times of heavy fog, or at any other time when your field of vision is limited and it 
would be difficult to gain a clear view of the area where it is to be used. In heavy rain, during 
lightning storms, at times of strong or gale-force winds or at any other time when the weather 
conditions might make it unsafe to use this product.

Summary of Contents for 760BPX Premium

































Reviews: