background image

CS260TX PREMIUM Chainsaw

6

Original Instructions Version November 16

CS260TX_141116

This Chainsaw is equipped with extremely sharp blades, always wear sturdy gloves when 
handling the blades and fit the safety guards when not in use.

When using this Chainsaw for the first time, take it to a wide, clear, open space, start the engine, 
and practice handling the Chainsaw until you are sure that you will be able to handle it properly in 
actual operation.

You should never use this Chainsaw when under the influence of alcohol, suffering from 
exhaustion or lack of sleep, suffering from drowsiness as a result of having taken medicine, or at 
any other time when your judgement might be impaired or that you might not be able to operate 
the Chainsaw properly and in a safe manner. 

Never allow children or anyone unable to fully understand the directions given in this manual to 
use this Chainsaw.

When planning your work schedule, allow plenty of time to perform the work and allow plenty 
of time for rest. Limit the amount of time you continuously use this product to 30-40 minutes per 
session and take 10-20 minutes of rest between work sessions. Also, try to keep the total amount 
of work performed in a single day to 2 hours. 

Never run the engine indoors as the exhaust gases contain harmful carbon monoxide.

Never use this Chainsaw in the conditions described below:

When conditions exist which might make it difficult to maintain a steady posture while using this 
product.

At night, at times of heavy fog, or at any other time when your field of vision is limited and it 
would be difficult to gain a clear view of the area where it is to be used. In heavy rain, during 
lightning storms, at times of strong or gale-force winds or at any other time when the weather 
conditions might make it unsafe to use this product.

Summary of Contents for CS260TX









































Reviews: