Addendum
20
9. Addendum
Specification
TFT color
panel
Touch panel
and controller
Input signal
Synchronization range
Protective screen sheet
Display colors
Luminance (Standard)
Contrast ratio (Standard)
Active display area
H x V
Input/output
signal connectors
Environmental
consideration
Power supply
Power Consumption
(
Standard
)
Regulation compliance
Protective construction for environment resistance
Corrosive gas resistance
Outline Dimensions
Weight
User Control
Diagonal
Native resolution (Pixel count)
Dot pitch
Aspect Ratio
Pixel array
Viewable angles (Standard)
Backlight method
Method
Processing
Resolution
Output
Video signal
Synchronization signal
Horizontal
Vertical
Hardness
Video signal
Touch communication signal
Surrounding temperature
Humidity
Earthquake resistance
OSD Operation
15 inches (38cm)
1024(H)×768 (V)
0.297mm
4:3
R+G+B vertical stripe
Left/Right:85°/85° Up/Down:85°/85°,CR
≧
10
LED
Analog resistance film
Non-Glare
0.4mm
RS232C/USB
Analog: 0.7Vp-p (Input impedance 75 ) , Digital RGB(TMDS)
Separated, Multiple synchronization signal TTL compatible
30.0kHz - 61.0kHz
55.0Hz - 75.4Hz
3H - 4H
16,190,000 at max. (8bit/color)
250cd/m
2
(default)
1500:1
304.1mm(H)×228.1mm(V)
Mini D-sub 15 pins (female)/DVI-D(female)
D-Sub 9 pins
（
male
）／
USB type-B
Front
：
0°C to 40°C
Back
：
0°C to 55°C
20% to 80%RH (Non condensing)
9
〜
150Hz 4.9m/s
2
DC24V
15W
VCCI class B, UL, c-UL
IP65 corresponding (Display part)
No Corrosive gas resistance
376(W)×291(H)×67(D)mm
Approx.3.5kg
Auto Setup, Brightness, Contrast, H.Position, V.Position, Sharpness,
Color Mode (Cool, Neutral, Warm, User), Clock, Phase, OSD H. Position,
OSD V. Position, OSD Timer, Source, Recall
This device has been manufactured as a multi-purpose product for use in general industrial applications and so on, and has
not been designed or manufactured for use with devices or systems that may represent a danger to human life.
Please contact a member of our sales staff if considering customized applications for nuclear power, electrical power,
aerospace, medical, or passenger-carrying movable equipment, or systems and so on.
This product has been manufactured under stringent quality control guidelines, however, it is recommended that a back-up or
fail-safe function be incorporated into the system when using with equipment that may cause major accidents or loss as a
result of a breakdown of this product.
When installing this display into the casing of a console and so on, please exercise sufficient caution with regards to
ventilation design to ensure that usage environment conditions Note are not exceeded. Furthermore, when installing the
display surface at an angle of 15- or more from a vertical surface, always ensure enforced ventilation with a fan etc. to ensure
that heat does not build up inside the casing of the console and so on.
Periodical maintenance is recommended to maintain performance when the annual operating time is long or the operating
ambient temperature is high.
Periodic maintenance is paid in principle. Please contact a member of our sales staff.
Note: Usage environment conditions refer to the ambient environment during operation required to guarantee the display
performance.
(This does not refer to the ambient temperature of the casing for the console and so on.)
Summary of Contents for TSD-FT1519-MN
