24
Appendices
For assistance call 1(800) 332-2119
CAUTION
BURN DANGER! HOT SURFACES INSIDE!
Touch lamp cartridge handle only. Do not touch lamp or lamp car-
tridge housing. Keep lamp cartridge horizontal during removal. Do
not tilt as glass may come out and cause injury. Replace lamp car-
tridge only with the same part number 915B455012.
La mp-Cartridge Replacement
CAUTION: If the television
is on, press POWER to turn
it off. Unplug the television
and allow it to cool for at least
one hour before attempting to
replace the lamp cartridge.
Lamp
The light source for this television is a
lamp, which is part of a lamp cartridge
assembly. The life of the lamp can vary,
based on the lamp itself, the air temperature around the TV while it is operat-
ing, the selected lamp mode, and your viewing patterns. Warmer air or poor
ventilation shorten the lamp life, as does setting
Lamp Energy
to
Bright
and
turning the television on and off frequently.
Mitsubishi warrants the lamp for one (1) year from the date of original
TV purchase at retail.
The lamp cartridge assembly is designed to be replaced by the TV
owner. The cost of labor for a service technician to replace the lamp
is not covered by the warranty.
To Order a New Lamp
To Receive a Replacement Lamp Cartridge Assembly Under Warranty
•
Visit our website at www.mitsuparts.com.
•
Call (800) 553-7278. Please have model number, serial number, and TV purchase date available.
To Purchase a Replacement Lamp Cartridge Assembly After Warranty
Visit our website at www.mitsuparts.com or call (800) 553-7278. Order the following:
Lamp Part Number 915B455012
WARNING
•
Do not remove the lamp cartridge immediately after turning off the television. You may get burned because the
lamp is very hot. Allow the television to cool for at least one hour before replacing the lamp cartridge.
•
Do not remove the lamp cartridge except when replacing it. Careless treatment can result in injury or fire.
•
Do not touch the lamp glass element. It may be very hot and break, causing injuries or burns.
•
Be sure not to insert any metal or flammable object into the lamp cartridge opening, as it may cause fire or electri-
cal shock. If a foreign object is inserted into the opening, unplug the AC cord of the TV and contact your dealer for
service.
•
Install the lamp cartridge securely. Failure to do so may cause a fire.
•
Do not touch the lamp glass elements. Oils from your fingers may cause premature lamp failure.
Hg
= MERCURY
THE LAMP INSIDE THIS PRODUCT CONTAINS MERCURY AND MUST BE RECYCLED OR DIS-
POSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. For disposal or recycling infor-
mation, please contact your local authorities or the Electronic Industries Alliance at
www.eiae.org
WARNING
THE ACCESS PANEL IS
PROVIDED WITH AN INTERLOCK
TO REDUCE THE RISK OF
EXCESSIVE ULTRAVIOLET
RADIATION. DO NOT DEFEAT
ITS PURPOSE OR ATTEMPT TO
SERVICE WITHOUT REMOVING
PANEL COMPLETELY.
Lamp-Substitution Alert
MEVSA recommends that you use only genuine Replacement Lamp Assemblies purchased directly from Mitsubishi or a
Mitsubishi Authorized Dealer or Mitsubishi Authorized Service Center. MEVSA advises that replacement lamps obtained
separately from the Lamp Cartridge and/or Lamp Assemblies obtained from unauthorized sellers may be incorrect for
your television, may not fit or perform properly and may even damage your television. MEVSA can not be responsible
for the performance, reliability or safety of any replacement lamps that are obtained from unauthorized sources.
Appendix B: TV Care
Summary of Contents for 3D DLP C12 Series
Page 39: ......
