6 - 27 6 - 27
MELSEC-GOT
6 HANDLING
6.7 Communication Module
The communication module is used to make the GOT interface compatible with the
system to be connected to.
For the details of the connection form, refer to the [GOT-A900 Series User's Manual
(GT Works Version5/GT Designer Version5 compatible Connection System Manual)].
6.7.1 Connection module types
The following connection module types are available.
Type
Description
A9GT-BUSSU
For bus connection, small connector type (For A/QnA/Motion controller CPU)
A9GT-BUS2SU
For multidrop bus connection, small connector type (For A/QnA/Motion controller CPU)
A7GT-J71AP23
For MELSECNET(II) optical link connection, for use as local station
A7GT-J71AR23
For MELSECNET(II) coaxial link connection, for use as local station
A7GT-J71AT23B
For MELSECNET/B connection, for use as local station
A7GT-J71LP23
For MELSECNET/10 optical loop network connection, for use as ordinary station
A7GT-J71BR13
For MELSECNET/10 coaxial bus network connection, for use as ordinary station
A8GT-J61BT13
For CC-Link connection, for use as intelligent device station
A8GT-J61BT15
For CC-Link connection, for use as remote device station
A9GT-J71E71-T
For Ethernet connection
6.7.2 Mounting procedure
1) Fit the communication module securing fixtures
in the GOT main unit.
2) Mount the communication module on the GOT
interface.
3) Tighten and fix the mounting screws (3 pcs.) of
the communication module in the specified
torque range.