40
5.25" drives
The 5.25" drive tray in the XEN-LS II system unit can
contain any standard size half height 5.25" device. Apricot
supplies a range of tape and CD-ROM drives, and a 5.25"
floppy drive, for this bay.
The following instructions describe the installation of a drive
in the bay. The
Generic instructions apply to all drives, and
describe the physical installation of a drive.
Instructions specific to each drive type are given after the
generic instructions.
Generic
1.
Power the system down.
2.
Take suitable anti-static precautions and remove the
system unit cover.
If you are unfamiliar with Apricot’s recommended
anti-static precautions and/or the process of
removing the system unit cover refer to your
Owner’s Handbook.
SECURING SCREWS
5.25" BAY
3.
Remove the two screws that secure the drive bay
and slide the bay backwards.