background image

BC29

 

B

ATTERY 

C

ABINET

 

 
4/16/2014 

 

22 

755-00087 R03 

 

10.

 

W

ARRANTY

 

LIMITED WARRANTY AND EXCLUSIONS 

 
C&C Power, Inc. strives to produce quality products at reasonable prices.  If you are not satisfied 

with our product because of a defect, we will repair or replace the defective part or parts free of 

charge for a period of one year from the date of purchase.  In the event you claim that the product 

contains a defect, simply notify C&C Power, Inc. of the defect, and we will arrange for repair or 

replacement.  The sole and exclusive remedy against C&C Power, Inc. relating in any way to a 

product  defect  shall  be  the  repair  or  replacement  of  defective  parts  as  provided  for  under  this 

LIMITED  WARRANTY.    No  other  remedy,  including,  but  not  limited  to,  incidental  or 

consequential  damages  for  lost  profits,  lost  sales,  injury  to  person  or  property,  or  any  other 

incidental or consequential loss, is available.  This LIMITED WARRANTY shall not be deemed 

to have failed of its essential purpose so long as C&C Power, Inc. is willing and able to repair or 

replace defective parts in the manner prescribed in this LIMITED WARRANTY. 

 

Certain  integrated  products,  which  are  not  manufactured  by  C&C  Power;  will  be 
warranted  by  the  applicable  manufacturer.    These  warranties  shall  be  between  the 
manufacturer  and  the  user.    Terms  and  conditions  may  vary.    These  integrated  products 
include,  but  may  not  be  limited  to,  the  following  products:    Batteries,  Inverters  and  UPS 
Systems. 

 
Any  action  for  breach  relating  to  the  sale  of  a  C&C  Power,  Inc.  product  must  be  commenced 

within one year after the cause of action has accrued. 

 
THIS  LIMITED  WARRANTY  IS  IN  LIEU  OF  ANY  OTHER  WARRANTY,  EXPRESS  OR 
IMPLIED,  AND  ALL  SUCH  WARRANTIES  ARE  EXCLUDED,  INCLUDING,  BUT  NOT 
LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A 
PARTICULAR PURPOSE. 
 

Summary of Contents for C&C Power BC29
























Reviews: