9
< Process for setting >
[1] To turn off air conditioner and change the remote
controller to "Fixed airfl ow direction mode"
1.Press ON/OFF button
1
to turn off the air conditioner.
2.Press Fan Speed button
2
and Filter
button
3
for more than 2 seconds
simultaneously and it becomes the fi xed airfl ow direction mode after a while.
2.Press Filter
button
3
to send the information on remote controller.
3. Wait for 15 seconds . How does the air conditioner run?
→
Only the air from the selected outlet blows downward.
→
Go to step[3].
→
Air from the wrong outlet blows downward.
→
Repeat 1 and set again.
→
All outlets are closed.
→
The number of the air conditioner (Address No. of indoor unit) is wrong.
Refer to How to fi nd air conditioner No..
[3] To fi x air direction
1.Press Mode button (Return button)
4
to blink Up/Down air direction indicater.
2.Press Set Temperature button
5
until the direction to set is chosen.
3.Press Filter
button
3
to send the information on remote controller to air
conditioner.
4.Wait for 15 seconds . How does the air conditioner run?
→
Airfl ow direction is set in the selected direction.
→
The fi xed setting completed (Go to step [4].)
→
Airfl ow direction is set in the wrong direction.
→
Repeat 2. and set again.
[4] To cancel "Fixed airfl ow direction mode"
1.Press ON/OFF button
1
to cancel "Fixed airflow direction mode".It is also
canceled by pressing Fan Speed button
2
and Filter
button
3
for more than
2 seconds simultaneously.
2.Do not operate remote controller for 30 seconds after the "Fixed airfl owdirection
mode" is canceled. It does not accept even if it is operated.
Air blows downward after it becomes
"fixed airflow direction mode"
"Fixed airflow direction mode" display
Note: "0" indicates
all outlets.
Outlet No.
Up/Down air direction Address No. of indoor unit
MITSUBISHI
ELECTRIC
label
Outlet No.4
Outlet No.2
Outlet No.3
Outlet No.1
Air direction changes
This indicates NO FIXED SETTING(canceled)
Up/Down air direction
Outlet No.
Address No. of indoor unit
[2] To select and identify the outlet to set
1.Press Set Temperature button
5
to change number with the outlet No. blinking.
Select outlet No. to set.
4. Electrical work
01̲BH79D046K03̲EN.indd 9
01̲BH79D046K03̲EN.indd 9
2009/01/07 8:45:11
2009/01/07 8:45:11
