Appendix 6. Precautions for Wiring M700 Series
6.4 Connection Example When Not Using Operation Panel I/O Unit
249
6.4 Connection Example When Not Using Operation Panel I/O Unit
Connection examples when not using operation panel I/O unit are introduced in this section.
(Note) Operation panel I/O unit is effective to simplify the wiring, etc.
Whether or not to adopt the operation panel I/O unit should be carefully considered at the machine tool
builder side.
[Examples when not using operation panel I/O unit]
(Example 1)
When operation area is made by using card-sized I/O card or scan I/O card, etc.
(Example 2)
When electric cabinet (control unit section) and operation panel (display unit section) are placed
within the same control panel.
(When the space between control unit and display unit is small, and simplification of wiring
between those units is not as significant.)
(Example 3)
When machine operation panel and keyboard unit are not necessary to be installed by using a
display unit with touch panel.
The following is a general connection diagram when not using operation I/O unit.
(Examples when using display unit with touch panel)
