Downloaded from Projector.com
EN – 7
ENGLISH
Bottom side
3
2
1
1
Rear adjustment feet
2
Lamp cover
3
Front adjustment feet
Caution:
Do not replace the lamp right after using the projector. The
lamp is very hot.
COMPUTER
VIDEO
KEYSTONE
EXPAND
VOLUME
LASER
P in P
AUTO POSITION
MENU
R-CLICK
ENTER
MUTE
STILL
16 : 9
SELECT
DVD
VIDEO
1
2
1
2
MEMORY
1
2
3
4
5
6
7
8
9
10
11
12
23
22
21
24
20
19
18
17
16
15
14
13
Remote control
1
Laser aperture
2
Transmission window
3
Indicator
4
POWER button
5
KEYSTONE button
6
EXPAND button
7
+ , – (VOLUME) buttons
8
Mouse pointer
9
MENU button
10 STILL button
11 MUTE button (Audio/Video)
12 Programmable buttons
13 SELECT switch
14 MEMORY button
15 16 : 9 button
16 ENTER button
17 R-CLICK button (For mouse)
18 Direction buttons
19 LASER button
20 AUTO POSITION button
21 PinP button
22 VIDEO 1, 2 button
23 COMPUTER 1, 2 button
24 Left click button (For mouse)
• The + and - buttons are used in the KEYSTONE
adjustment and the EXPAND mode in addition to the
volume control.
• Pressing the LASER button emits a laser beam. Even when
you keep holding down the LASER button, it is emitted
only one minute. To keep emitting it longer, press the
LASER button again.
• You can disable the LASER button to prevent laser
radiation due to misuse of the button.
How to disable the LASER button
While holding the LASER button down, press the
}
button three times.
How to enable the LASER button
While holding the LASER button down, press the
{
button three times.
About the laser beam
This remote control is a Class 2 laser product. (Max. output : 1 mW, Wavelength
: 640-660 nm)
Beam Divergence : 6m distance about 10.0mm x 10.0mm (
±
6.0mm)
CAUTION :
• Pressing the LASER button on the remote control emits a laser beam. Do not
look into the laser beam directly. Do not point the laser beam at anyone.
Looking at the laser beam directly may damage eyesight.
• Use of controls or adjustments or procedures other than those specified herein may
result in hazardous radiation exposure.
LASER RADIATION
DO NOT STARE INTO BEAM
WAVE LENGTH: 640-660nm
MAX OUTPUT : 1mW
CLASS 2 LASER PRODUCT
AVOID EXPOSURE-LASER
RADIATION IS EMITTED
FROM THIS APERTURE
C A U T I O N
Complies with 21 CFR, 1040.10 AND 1040.11
IEC 60825-1:1993+A1:1997
