Mitsubishi Electric CP-30DW, Operation Manual

2

In the interest of safety, please observe the following precautions:

POWER REQUIREMENT

This product is designed to operate at 120/220-240V AC 50/60Hz in the U.S.A. and Canada, and
220-240V AC 50/60Hz in Europe.  Never connect to any outlet or power supply having a different
voltage or frequency.

WARNING: THIS APPARATUS MUST BE EARTHED.

This equipment is classified as class  , according to the type of protection against electric shock.

PROTECTIVE MEASURES

IF ABNORMALITIES ARISE

If the printer emits smoke or abnormal sounds, immediately unplug the power cord from the
printer or power outlet.  Continued use may be dangerous. Contact your dealer about having the
printer checked and serviced.

NEVER INSERT ANY OBJECT INTO THE UNIT

Nothing other than supplies for this printer should ever be inserted into the printer.  Other items
can cause a safety hazard and extensive damage to the mechanism and electronics.

DO NOT SET HEAVY OBJECTS ON TOP OF THE UNIT

Heavy objects can damage the unit and/or cause malfunction.

AVOID DAMAGING THE POWER CORD

Do not set anything heavy on the power cord nor allow it to become pinched, or cut.  If the power
cord becomes damaged, replace it immediately to avoid shock hazard or electrical fire.
When the power cord is replaced, use the same type as originally supplied, it is designed to
reduce interference to radio & TV reception.
When unplugging the power cord, hold the plug, and remove it carefully.

KEEP THE UNIT DRY - DO NOT PLACE WATER OR OTHER LIQUID CONTAINERS
ON TOP OF THE UNIT

Liquids which get into the unit can cause serious damage to the unit and potential shock or fire
danger.  If liquid is spilled into or seeps into the unit, unplug the Power Cord immediately and
seek service as soon as possible to avoid additional or possible damage due to corrosion.
“In the interest of safety, avoid handling of liquids near the unit.”

DO NOT REMOVE THE CABINET.  THERE ARE NO USER SERVICEABLE PARTS
INSIDE AND YOU WILL EXPOSE YOURSELF TO HAZARDOUS VOLTAGES AND/
OR YOU MAY CAUSE DAMAGE TO THE UNIT.

Touching internal parts is dangerous, and may cause a malfunction.  Contact your dealer to carry
out internal checks and adjustments. Disconnect the power cord before opening the cover to
clear a paper jam, etc.

DO NOT USE THIS UNIT WHEN DROPPED OR DAMAGED THE CABINET

Using a unit dropped or damaged its cabinet may cause fire or electric hazard.

SAFETY PRECAUTIONS