Mitsubishi Electric DX-TL2500E Installation And Operation Manual Download

Page: 2 / 106

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

Network

• From the personal computer connected to Internet using the Microsoft Internet Explorer, the image screen
such as live images, search and playback image can be displayed. (

see pages 82-87)

• LAN software for applications in grate variety
Optional software with high-quality communication functions.

Built-in duplex 16 channel multiplexer

• The screen mode can be switched on the monitor such as single screen, split4, split9 and split16 screen and
sequential screen, split4 sequential screen and split9 sequential screen. (

see page 37)

• The unit is equipped with the 2 type-output connector to display the different mode split screen on the each of
different monitors. (

see page 38)

• Convenient simultaneous recording-playback function. Live picture from all cameras can be recorded con-
tinuously while the recording of desired camera is played back.

• The unit can neither record nor display on the monitor the camera image legally prohibited.

Recording

• Recording rate 50 pps ( picture per second )
50 pps recording which is becoming the industrial standard is available on the 16 ch unit. 3 pps recording per
each camera is also available even using 16 cameras.

• Built-in 120GB HDD. Furthermore 3 HDDs can be built in the unit by installing 2 additional HDDs.
(

see page 17)

• The maximum capacity of peripheral recording device is 12TB. (2TB (1 peripheral recording device con-
nected through SCSI interface) x 6 HDDs) (

see page 17)

• Various record setting
Recording interval and picture quality of each camera can be set individually to both normal recording and
alarm recording. (

see pages 43-45)

• Flexible alarm recording
Any camera number for alarm recording of 3 modes such as Alarm Channel, Alarm Plus and Alarm25 can be
assigned. 4 triggers are also selectable out of various combination such as external alarm input and motion
detection, external alarm input or motion detection, only external alarm input or only motion detection. (

see

pages 43-45)

• Partition recording
Alarm images can be recorded in a designated area within HDD to keep alarm images longer term than normal
recording. The partition area can be set from 10% to 90% of HDD capacity. (

see page 79)

• Mirror recording
Mirror recording for prevention against a data loss in case of HDD crash. (

see page 78)

• Built-in motion detection
It is available the high-fidelity detection setting by the detection area of 192 (12 x 16) dots. (

see pages

41,42)

• Wavelet compression
Wavelet method with compression of higher-rate than JPEG.

• 1ch PCM audio recording. (

see pages 51,52)

Features