Mitsubishi Electric DX-TL900U Installation And Operation Manual Download

Page: 18 / 76

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

Basic Operations

■

Multiplexer functions

Buttons on the front of the unit can be used to perform
some of the multiplexer functions.

♦

Multiplexer buttons

MOVE button

2 SPLIT/SEQUENCE button

3 ZOOM button

1 Camera number buttons (1 to 9)

SPLIT/

SEQUENCE

ZOOM

1. Camera number buttons (1 to 9)
Video images of cameras connected to CAMERA IN ter-
minals 1 to 9 on the rear of the unit are displayed.

By pressing a camera number button, video

images can be displayed even if the camera is not
set for recording.

2. SPLIT/SEQUENCE button
The screen switches in order of SPLIT9, 3 types of SPLIT4
SCREEN SETTING (a, b, c), SPLIT4 SEQUENTIAL, and
SINGLE SEQUENTIAL set in the <MPX DISPLAY SET-
TINGS> screen (SEQUENTIAL display is skipped during
playback).

3. ZOOM button
When this button is pressed during single screen display,
magnification 100% screen appears and the magnifica-
tion centre point (X) is displayed at the center. Pressing
the button again will switch the magnification to 200% and
then 400%. By pressing the MOVE buttons, the magnified
screen can be moved vertically/horizontally with the cen-
ter point as the axis (

see “ZOOM button operations”,

page 32).

When the ZOOM button is pressed, camera number
buttons 1 to 4 switches to the MOVE buttons.

■

Menu settings

The operational conditions of this unit can be set in the
menu screens according as needed. Although the setting
method will differ slightly depending on the menu screen,
the basic setting method of using the JOG dial and SHUT-
TLE ring will be used for setting the display mode as an
example.

SHUTTLE ring

JOG dial

Example : Set DISPLAY MODE to “3” ( default : “1” ).

1. Set the MAIN switch on the rear of the unit to ON. Press
the POWER button on the front after the ACCESS indicator
turns off.

• “SETTING UP...” appears on the screen and the unit is
booted.
• POWER button operation will not be accepted while the
ACCESS indicator is flashing. Press the POWER button after
the indicator turns off.

2. After boot-up, press the SET UP button inside the door on
the front of the unit.

• The <SETTINGS> screen appears.

<SETTINGS>
>>TIME DATE/DISPLAY SETTINGS
MPX DISPLAY SETTINGS
MOTION DETECTION SETTINGS
RECORD SETTINGS
TIMER PROGRAM SETTINGS
INITIAL SET UP/INFORMATION

QUICK SETTINGS

MEMO:

When the SET UP button is pressed and the

menu screen appears, the background darkens and
the displayed characters become easier to see.

3. Check to see that the cursor (>>) is positioned at “TIME
DATE/DISPLAY SETTINGS”, and then turn the SHUTTLE ring
clockwise.

• The <TIME DATE/DISPLAY SETTINGS> screen appears (
see page 30).

<TIME DATE/DISPLAY SETTINGS>
>>TIME DATE ADJUST
DISPLAY MODE 1
CLOCK LOCATION SETTING
CAMERA DISPLAY NUMBER
CAMERA TITLE/MEMO SETTING
DUPLEX MODE DISPLAY BOTTOM

01-01-2003 00:00:00

4. Turn the JOG dial to move the cursor to “DISPLAY MODE”
and turn the SHUTTLE ring clockwise.

• The background of the “DISPLAY MODE” setting turns red
and flashes.

When turning the JOG dial clockwise, the cursor

(>>) moves down. When turning counterclockwise,
the cursor (>>) moves up.

5. Turn the JOG dial to display “3”.

• The display mode sample on the bottom of the screen
changes to <MODE 3>.

6. Turn the SHUTTLE ring clockwise.

• The setting is confirmed and flashing stops.
• To continue with other settings, repeat steps 4 and 5.

When turning the SHUTTLE ring counterclockwise

while the setting is flashing, the setting will return to
the previous setting.

To exit the screen, turn the SHUTTLE ring