GCH15010
55
DISASSEMBLY PROCEDURE
PHOTOS
Photo 5-6
Photo 5-7
Photo 5-8
Photo 5-9
5-3. How to remove the thermistor THW5A,THW5B
(1) Remove the front, right, left, and rear panels. (Photo
5-6) (Refer to section 6-1 and 6-2)
(2) Remove all tapes securing the insulation first, then
remove two sheets of insulation around the tank.
(Photo 5-7, Photo 5-8, and Photo 5-9
)
< CAUTION(1) >
Take care NOT to break the plastic bag covering the
insulation when removing the tapes securing the
insulation. If the plastic bag is broken, repair with tape
or other materials.
Removal of the front,
right, left, and rear panels.
Tape
Tape
First layer of insulation
(outside)
First layer of
insulation (outside)
First layer of insulation (outside)
Second layer of insulation (inside)
Second layer of
insulation (inside)