31
Fernox Protector HP-5c
Product Uses
Fernox HP-5c is a concentrated heat transfer fluid capable of frost protection from -4ºC
to -14ºC especially formulated for use in Air Source Heat Pumps and underfloor heating
circuits. Fernox HP-5c also provides long term protection from damage caused by
corrosion, limescale and bacteria and maintains a stable pH across a range of
operational temperatures. Fernox HP- 5c is compatible with all materials commonly
used in Heat Pumps and underfloor heating systems.
• Concentrated heat transfer fluid suitable for use in Air
Source Heat Pumps and underfloor heating systems
• Frost protection from -4°C to -14°C
• Protects against corrosion, limescale
and bacterial contamination
• Non-toxic
• Compatible with all materials commonly found in Heat Pump and underfloor heating systems
• pH stable
Physical Properties
Application and Dosage
Dilute before use with mains water. In order to ensure adequate corrosion and biocidal protection, the minimum
“in-use” concentration of the product is 10%. Maximum “in-use” concentration is 30%. Upon dilution Fernox HP-5C
will provide frost protection according to the table below:
Frost protection level can be checked using a
Fernox Refractometer. Existing heating systems
should be cleaned of sludge and limescale
deposits with a suitable Fernox Heat Pump
Cleaner before adding Fernox HP-5c.
Available from Mitsubishi Electric in the following quantities
77
FTC4 Installation Manual
Odour
Characteristics
Form
Liquid
Appearance
Clear, blue liquid
Density
1.03 - 1.05
pH
6-7
Composition
Anaquepus solution of monopropylene glycol with specifically
formulated inhibitors, stabilisers and biocides
Frost Protection
-4°C
-9·C
-14°C
Concentration
10%
20%
20%
Quantity SAP No.
10 litre 246670
25 litre 246671
Summary of Contents for Ecodan HUS210FTC4ST
Page 2: ......
Page 8: ...5 Pipework Configuration 8 FTC4 Installation Manual ...
Page 20: ...20 FTC4 Installation Manual 14 Ecodan Only System Schematic ...
Page 83: ......