25
INVERTER SETTING
4
[Explanation of table]
External
: Command is valid only from control terminal.
NET
: Command only from communication is valid.
Combined : Command from both control terminal and communication is valid.
—
: Command from either of control terminal and communication is invalid.
S
e
le
c
ti
ve fu
n
c
ti
o
n
P
r.
1
78 t
o Pr
. 18
4
s
e
tti
n
g
61 STR
Reverse rotation
command
NET
External
62 RES Inverter reset
External
65 X65
PU/NET operation
switchover
External
66 X66
External/NET operation
switchover
External
67 X67
Command source
switchover
External
REMARKS
• The command source of communication is as set in
Pr. 550
and
Pr. 551
.
• The
Pr. 338
and
Pr. 339
settings can be changed while the inverter is running when
Pr. 77
= "2". Note that the setting
change is applied after the inverter has stopped. Until the inverter has stopped, communication operation command
source and communication speed command source before the setting change are valid.
Operation
Location
Selection
Pr. 338 Communication operation
command source
0: NET
1: External
Remarks
Pr. 339 Communication speed
command source
0:
NET
1:
External
2:
External
0:
NET
1:
External
2:
External
