189
The EU Directives are issued to standardize different national regulations of the EU Member States and to facilitate free
movement of the equipment, whose safety is ensured, in the EU territory.
Since 1996, compliance with the EMC Directive that is one of the EU Directives has been legally required. Since 1997,
compliance with the Low Voltage Directive, another EU Directive, has been also legally required. When a manufacturer
confirms its equipment to be compliant with the EMC Directive and the Low Voltage Directive, the manufacturer must declare
the conformity and affix the CE marking.
The authorized representative in the EU
The authorized representative in the EU is shown below.
Name: Mitsubishi Electric Europe B.V.
Address: Gothaer Strasse 8, 40880 Ratingen, Germany
Note
We declare that this converter, when equipped with the dedicated EMC filter, conforms with the EMC Directive in industrial
environments and affix the CE marking on the inverter.
When using the inverter in a residential area, take appropriate measures and ensure the conformity of the inverter used in
the residential area.
(1) EMC Directive
We declare that this converter, when equipped with the EMC Directive compliant EMC filter, conforms with the EMC
Directive and affix the CE marking on the inverter (except the single-phase 100V power supply model).
EMC Directive: 2004/108/EC
Standard(s): EN61800-3:2004 (Second environment / PDS Category "C3")
Note: First environment
Environment including residential buildings. Includes building directly connected without a transformer to the low
voltage power supply network which supplies power to residential buildings.
Second environment
Environment including all buildings except buildings directly connected without a transformer to the lower voltage
power supply network which supplies power to residential buildings.
Note
Set the EMC Directive compliant EMC filter to the converter. Use a recommended EMC compliant EMC filter shown in
the table below. Insert line noise filters and ferrite cores to the power and control cables as required.
Recommended EMC compliant EMC filter (Manufactured by: SOSHIN ELECTRIC CO.,LTD.)
200V class
400V class
Connect the converter to an earthed power supply.
Install a motor, the EMC Directive compliant EMC filter, and a control cable according to the instructions written in the
EMC Installation Guidelines (BCN-A21041-204).
Confirm that the final integrated system with the inverter conforms with the EMC Directive.
Mount the converter (including all peripheral devices such as outside box, reactor 1, and reactor 2) to the enclosure
panel of IP54 or higher.
Appendix 2 Instructions for compliance with the EU Directives
Converter model
FR-HC2-7.5K
FR-HC2-15K
FR-HC2-30K
FR-HC2-55K
FR-HC2-75K
EMC compliant
EMC filter
HF3040C-UQC
HF3080C-UQC
NF3150A-VZ
NF3250C-VZ
NF3300C-VZ
Converter model FR-HC2-H7.5K
FR-HC2-H15K
FR-HC2-H30K
FR-HC2-H55K
FR-HC2-H75K
EMC compliant
EMC filter
HF3040C-SZC-
48DDD
HF3040C-SZC-
48DDD
HF3080C-SZC-
48EDE
TF3150C-TX
TF3150C-TX
Converter model FR-HC2-H110K
FR-HC2-H160K FR-HC2-H220K FR-HC2-H280K FR-HC2-H400K FR-HC2-H560K
EMC compliant
EMC filter
NF3250C-UQA
NF3300C-SDK
NF3400C-SDK
NF3600C-SDK
NF3800C-SDK
NF31000C-SDK
HC2.book 189 ページ ２０１２年１１月１９日 月曜日 午前１０時５２分
