5 - 20
5.3 GOT Side Settings
5.3.2
Communication detail settings
Make the settings according to the usage environment.
*1
To connect the GOT with the Ethernet module (Q Series) in the one-on-one relationship using a cross cable, set [Timeout Time] to
6sec. or longer.
*2
Each of [GOT Station] set in the communication detail setting and [Station] set in the Ethernet setting must be set to different
station numbers.
➠
*3
The range is 1 to 64 when [Driver] is set to [Ethernet(FX), Gateway].
*4
When connecting to the QCPU, LCPU, do not set [5009] for the port No. Otherwise, monitoring becomes unavailable.
Item
Description
Range
GOT Net No.
Set the network No. of the GOT.
(Default: 1)
1 to 239
GOT Station
*2
Set the station No. of the GOT.
(Default: 18)
1 to 120
*3
GOT Communication
Port No.
*4
Set the GOT port No. for the connection with the Ethernet module.
• For Ethernet(MITSUBISHI ELECTRIC),Gateway
(Default: 5001)
• For Ethernet(FX), Gateway
(Default: 5019)
1024 to 5010,
5014 to 65534
(Except for 5011 to 5013 and 49153 to
49170)
Retry
Set the number of retries to be performed when a communication timeout
occurs.
When receiving no response after retries, the communication times out.
(Default: 3times)
0 to 5times
Startup Time
Specify the time period from the GOT startup until GOT starts the
communication with the PLC CPU.
(Default: 3sec)
3 to 255sec
Timeout Time
*1
Set the time period for a communication to time out.
(Default: 3sec)
1 to 90sec
Delay Time
Set the delay time for reducing the load of the network/destination PLC.
(Default: 0ms)
0 to 10000
( 10ms)
Servo axis switching GD device
head No.
Set the servo axis switching GD device head No.
(Default: 10)
For details, refer to the following POINT.
➠
(3) Indirect specification of the servo axis No.
<For GT27, GT25, GT23>
0 to 65520
<For GT21, GS>
0 to 2032
Summary of Contents for GOT2000 Series
