EN-8
1
2
Preparating your projector (continued)
Bottom side
1 Adjustment foot (for vertical position)
2 Adjustment foot (for horizontal position)
1
2
COMPUTER
VIDEO
S-VIDEO
DVI-D(HDCP)
HOME
PageUP
END
PageDOWN
AUTO POSITION
KEYSTONE
ASPECT
PinP
STILL
EXPAND
MUTE
WALL SCREEN
1
2
VOLUME
3
4
5
6
7
8
9
10
11
12
27
26
25
24
23
22
21
20
19
17
18
16
14
13
15
CE
MENU
ENTER
LASER
R-CLICK
28
Remote control
1 Laser
aperture
2 Transmission
window
3 Indicator
4 POWER
button
5 VIDEO
button
6 DVI-D
(HDCP)
button
7 HOME
button
8 END
button
9 Mouse
pointer
10 MENU button
11 + , - (VOLUME) buttons
12 WALL SCREEN button
13 CE (Color Enhancer) button
14 MUTE button (Audio/Video)
15 EXPAND button
16 STILL button
17 PinP button
18 ASPECT button
19 KEYSTONE button
20 ENTER button
21 R-CLICK button
22 Direction buttons
23 LASER button
24 AUTO POSITION button
25 PageUP and PageDOWN buttons
26 S-VIDEO button
27 COMPUTER 1, 2 buttons
28 L-CLICK button
• The + and - buttons are used in the KEYSTONE
adjustment and the EXPAND mode in addition to
the volume control.
• The direction buttons are used for the keystone
adjustment and fi ne adjustment (
and
buttons
only).
• Pressing the LASER button emits a laser beam.
Even when you keep holding down the LASER but-
ton, it is emitted only one minute. To keep emitting
it longer, press the LASER button again.
• You can disable the LASER button to prevent laser
radiation due to misuse of the button.
How to disable the LASER button
While holding the LASER button down, press the
button 3 times.
How to enable the LASER button
While holding the LASER button down, press the
button 3 times.
• Whenever the batteries are replaced, the LASER
button is enabled.
About the laser beam
This remote control is a Class 2 laser product. (Max. output: 1 mW, Wavelength: 620-640 nm)
Beam Divergence: 6 m distance about 10.0 mm x 10.0 mm (±6.0 mm)
Caution:
• Pressing the LASER button on the remote control emits a laser beam. Do not look into the laser beam directly. Do
not point the laser beam at anyone. Looking at the laser beam directly may damage eyesight.
• Use of controls or adjustments or procedures other than those specifi ed herein may result in hazardous radiation exposure.
• This remote controller cannot be repaired.
or
There are 2 types of labels placed on the back of the
remote control and either of them is placed on it.
