Mitsubishi Electric LASERVUE L75-A94, Supplemental Owner'S Manual

22

2.  TV Menus

For assistance call 1(877) 675-2224

Setup, continued

Setup

  Cha nnel

Ant Air,

Ant Cable

You must perform a channel scan to receive digital channels.

  The scan searches for broad-

cast channels and adds them to TV memory.  To start channel scan:

1. 

Highlight one of the input selections based on your connection to the 

ANT input

:

• 

Air

 when connected to an indoor or outdoor antenna.

• 

Cable

 when connected to direct cable (no cable box)

2. 

Select the scan type.
• Select 

All Channels

 for an initial scan or after moving the TV to an new area with a differ-

ent channel line-up.

• Select 

Add only new channels

 to search for channels newly broadcasting since the 

previous scan.

3. 

Press   to highlight 

SCAN.

4. 

Press 

ENTER

 to start channel memorization.

See below for additional notes on Scan.

All Channels,
Add only new 

channels

Scan

E  dit

After channel scan, 

Edit

 lets you add and delete memorized channels.  Memorized channels are 

those you can tune using the 

CH

 key.  Edit the channel list to limit tuning to channels you watch.

• Press 

CH/PAGE 

to jump to the next or previous page of channel numbers.

• Press         to move through all channel numbers, one at a time.

Adding/Deleting Channels Using the Channel Edit Menu

• 

Channels marked with a check are in memory.

• 

To add or delete a channel from  memory, highlight 
the channel number and press 

ENTER

.

• 

To add a single digital channel not in the list, see the 
notes under 

Scan

 on  this page .

• 

Digital channels are listed by virtual channel number 
with the physical channel number shown in small 
gray text.

-

Virtual  Channel Number

 (digital channels only).  

A channel number sent by a local broadcaster.

-

Physical Digital Channel Number.

  The 

channel number officially assigned to the actual 
broadcast frequency; shown on screen in gray 
text.

Notes on Sca  n and Channel  Memorization

• 

Channel memorization may take up to 15 minutes to 
complete.

• 

To stop channel memorization before completion, press 

CANCEL

.  Channels already added are retained.

• 

When watching TV, press 

CH

 to move through 

memorized channels.  Press and hold 

CH

 to speed 

through channels.

• 

To add a  digital channel that does not appear in the 

Edit

 menu without performing channel memorization:

1. 

Look up the  physical channel number for 
the new digital channel.  See the website 

www.antennaweb.org

 for help.

2. 

Press 

INPUT

 and select the 

ANT 

input.

3. 

Use the number and 

CANCEL

 keys to enter the 

physical channel number followed by “-1” and 

ENTER

.  For example, for physical channel 36,

3

6

1

ENTER

.

The TV will search for a digital channel on the channel 36 
frequency.  When it finds the channel, it will:

a.  Add the channel to memory.
b.  Change the channel number to the virtual 

channel number sent by the broadcaster.

c.  Add to memory any associated sub-chan-

nels.

• 

Rememorize channels if you move the TV to a different 
geographic area with a different channel line-up.