95
MITSUBISHI ELECTRIC
/ REMOTE CONTROLLER
M SERIES -
WALL MOUNTED
Nr.
JR05
JR06
0
No Modification
No Modification
1
Cut JR05
No Modification
2
No Modification
Cut JR06
3-9
Cut JR05
Cut JR06
SLZ-M / SEZ-M
MFZ-KT / MFZ-KJ
PKA-M
Nr.
J41
J42
0
No Modification
No Modification
1
Cut J41
No Modification
2
No Modification
Cut J42
3-9
Cut J41
Cut J42
Nr.
J41
J42
0
No Modification
No Modification
1
Cut J41
No Modification
2
No Modification
Cut J42
3-9
Cut J41
Cut J42
(1) Take out the batteries.
(2) Cut jumpers JR05 - JR06 on the PC board as shown in the tab.
(3) Keeping OFF the remote controller, press
for 2 seconds, until the
indoor unit number appear.
(4) Set the number as shown in tab. pressing
, until the right number is
visualized.
(5) Press
to confirm, the remote controller will shoutdown.
(1) Push SET button with an object that has an narrow end.
blink and number of model appears.
(2) Push twice mean button, number "0" now blink.
.
(3) Use
button, to set the pair number.
(4) Push SET button with an object that has an narrow end.
(1) Push SET button with an object that has an narrow end.
blink and number of model appears.
(2) Push twice mean button, number “0” now blink.
.
(3) Use
button, to set the pair number.
(4) Push SET button with an object that has an narrow end.
S SERIES
P SERIES
Summary of Contents for M-SERIES
