82-
Settings
Welcome screen
On switching on your mobile, a Welcome screen is displayed prior to the Standby display. This
screen is a default one but it can be customised by selecting any of the Pictures folder images
(see "Pictures", page 59).
Goodbye screen
On switching off your mobile, a Goodbye screen is displayed. This screen is a default one but
it can be customised by selecting any of the Pictures folder images (see "Pictures", page 59).
Backlight
To adjust the backlight for your screen:
Contrast
You can select the contrast level for your screen:
Status light
You can activate or desactivate the status light on your mobile (please see "Status light", page 14):
Keypad
Keypad lock
When the keypad lock is activated, this prevents the accidental operation of the keys. The key
tones are muted.
The keypad lock is suspended when an incoming call is received and resumed once the call is
over. Emergency calls (112 or other official emergency number) can however be made. If a key
is pressed, a reminder message is displayed.
1
Press the [Menu] key.
Select
Settings
.
2
Select
Display
then
Standby screen
.
3
Select
Welcome screen
.
4
Select
Default
to set the default image as standby display for your Welcome screen or select
My picture
(see "Pictures", page 59) to select one of the stored pictures .
5
Select
Save
to store your setting.
You can also set the Welcome screen from the Pictures menu (see "Setting a still or animated image as an
Idle screen as a Welcome screen or as a Goodbye screen from the Pictures folder", page 60).
1
Press the [Menu] key.
Select
Settings
.
2
Select
Display
then
Standby screen
.
3
Select
Goodbye screen
.
4
Select
Default
to set the default image as standby display for your Goodbye screen or select
My picture
(see "Pictures", page 59) to select one of the stored pictures.
5
Select
Save
to store your setting.
You can also set the Goodbye screen from the Pictures menu (see "Setting a still or animated image as an Idle
screen as a Welcome screen or as a Goodbye screen from the Pictures folder", page 60).
1
Press the [Menu] key.
Select
Settings
.
2
Select
Display
then
Standby screen
.
3
Select
Backlight
.
4
Adjust the backlight with the [Up arrow] or [Down arrow] keys (select a value from 1 to 4) and
select
OK
.
5
Select
Save
to store the setting.
1
Press the [Menu] key.
Select
Settings
.
2
Select
Display
then
Standby screen
.
3
Select
Contrast.
4
Adjust the contrast with the [Up arrow] or [Down arrow] keys (-3 to +3) and select
OK
.
5
Select
Save
to store the setting.
1
Press the [Menu/T9] key.
Select
Settings
.
2
Select
Display
then
Standby screen
.
3
Select
Status light
.
4
Select
On
or
Off
.
Summary of Contents for M420i
Page 100: ...100 Notes NOTES MQ860P017Z01 ...