88-
Wap
WAP™
Your phone allows Wap™(Wireless Application Protocol) connections to
access operator and/or Wap™ provided services (e.g. news, sports, weather,
travel buying, etc.).
To get a Wap™ connection please make sure:
- your SIM card bears a Data subscription
- all the necessary parameters are stored into the phone. These parameters
may have been set by your operator. If not you have to enter them manually.
Please contact your service provider to check these elements and get the de-
tailed list of parameters to be entered.
Storing the connection settings
The current date and time must be set before you enter any Wap™ connection setting.
The profile list can contain up to 10 Wap™ profiles. A profile is a list of parameters that allow
Wap™ connections.
To enter and store the profile details
You can only register profile details via the standard mode if you have previously registered profiles
in the Connection manager menu (see "Connection manager", page 99):
Starting a Wap™ session
If several Wap™ profiles are stored, you need to select one before launching a session:
1
Press the [Menu/T9] key. Select
Wap
.
2
Select
Settings
.
3
Select
Wap profiles
.
4
Choose an empty profile (
[...]
) by selecting
OK
.
5
Enter the profile name and select
OK
.
6
Select
Home page
. Select
List
to select one of the available home page addresses or the
http:// and https:// root addresses, or type in the url address.
7
Select
Connection profiles
. Enter the requested information (the GSM connection and
GPRS connection fields are linked to the Connection manager and thus allow to pick one
from the displayed list - see "Connection manager", page 101). Select
Save
to store the
data.
8
Select
Gateway settings
and type in the IP address.
9
Select
Push parameters
(please contact your service provider to get the information to be
entered). Your Wap profile is then stored.
1.All the requested parameters are obtainable from your network operator and/or Wap™ provider.
2. The phone number or access point name, the login and the password are to be stored in the Connection
Manager (see "Connection manager", page 101).
3. Access to the connection settings may depend on the pre-programmation of the settings. The connection
settings menu may not be available in some cases. These settings may be 'Locked' and not be user program-
mable.
4. You can request the activation of the security feature from the profiles list (Advanced settings / Activate
security).
5. Your service provider may require to have the security context reset. Select Yes.
1
Press the [Menu/T9] key. Select
Wap
.
2
Select
Settings
.
3
Select
Wap profiles
.
4
Scroll to the required profile and choose one by pressing
OK
(
Selected
is displayed).
If the profile was already selected, pressing OK directly leads to the profile contents.