3
AUTO
COOL
HEAT
AUTO
FAN
VANE
COOL/HEAT
RESET
TEMPERATURE
DOWN
F
UP
ON/OFF
Signal transmitting section
Operation display section
ON/OFF (operate/
stop) button
Operation select button
Fan speed control button
Temperature buttons
Vane control button
RESET button
(This diagram shows an overall view.)
NAME OF EACH PART FOR R/C
MANUAL OPERATION(COOL/HEAT)
To select the COOL or HEAT mode
1
Press the
ON/OFF
button.
2
Select the operation mode by pressing
the
COOL/HEAT
button.
Each time this button is pressed, the operation
mode alternates COOL and HEAT.
To stop operation:
■
Press the
ON/OFF
button.
■
When the set temperature is to be changed:
■
Press the
DOWN
button to lower the tempera-
ture. One press lowers the temperature by
about 2
°
F.
■
Press the
UP
button to raise the temperature.
One press raises the temperature by about
2
°
F.
NOTE
When the ambient temperature is too high, the room
temperature may not reach the set temperature since
the unit operates to cool under high load.
Remote controller
AUTO
COOL
HEAT
AUTO
FAN
VANE
COOL/HEAT
RESET
TEMPERATURE
DOWN
F
UP
ON/OFF
