MDS-E/EH Series Instruction Manual
4 Setup
233
IB-1501229-F
When using coil switch function, set the current loop gain for when the low-speed coil is selected.
The setting value is determined by the motor's electrical characteristics so that the value is fixed to each mo-
tor used.
Set the value given in the spindle parameter list. (For Mitsubishi adjustment)
---Setting range---
1 to 20480
When using coil switch function, set the current loop gain for when the low-speed coil is selected.
The setting value is determined by the motor's electrical characteristics so that the value is fixed to each mo-
tor used.
Set the value given in the spindle parameter list. (For Mitsubishi adjustment)
---Setting range---
1 to 8192
When using coil switch function, set the current loop gain for when the low-speed coil is selected.
The setting value is determined by the motor's electrical characteristics so that the value is fixed to each mo-
tor used.
Set the value given in the spindle parameter list. (For Mitsubishi adjustment)
---Setting range---
1 to 8192
Not used. Set to "0".
Not used. Set to "0".
Set the vibration frequency to suppress when machine vibration occurs.
(Enabled at 50 or more.)
When not using, set to "0".
Related parameters: SP034/bitB-9
---Setting range---
0 to 5000 (Hz)
Set the vibration frequency to suppress when machine vibration occurs.
(Enabled at 50 or more.)
When not using, set to "0".
Related parameters: SP034/bitF-D
---Setting range---
0 to 5000 (Hz)
Set the magnification of the torque current stabilizing gain. (For Mitsubishi adjustment)
When set to "0", the torque current stabilization is disabled.
When not using, set to "0".
---Setting range---
0 to 32767
#13082
SP082 IDAL
D axis current lead compensation low-speed coil
#13083
SP083 IQGL
Q axis current gain low-speed coil
#13084
SP084 IDGL
D axis current gain low-speed coil
#13085
SP085
#13086
SP086
#13087
SP087 FHz4
Notch filter frequency 4
#13088
SP088 FHz5
Notch filter frequency 5
#13089
SP089 TMKQ
Spindle output stabilizing gain Q axis
Summary of Contents for MDS-E
