MDS-E/EH Series Instruction Manual
11 Appx. 2: D/A Output Specifications for Drive Unit
474
IB-1501229-F
11.1 D/A Output Specifications
Drive unit has a function to D/A output the various control data. The servo and spindle adjustment data required for
setting the servo and spindle parameters to match the machine can be D/A output. Measure using a high-speed
waveform recorder, oscilloscope, etc.
Note that the output pins differ between MDS-EJ/EJH-V1, MDS-EJ-SP and MDS-EJ-V2/SP2.
D/A output specifications
When the output data is 0, the offset voltage is 2.5V. If there is an offset voltage, adjust the zero level position in the
measuring instrument side.
Item
Explanation
No. of channels
2ch
Output cycle
0.8ms (min. value)
Output precision
12bit
Output voltage range
0V to 2.5V (zero) to +5V
Output magnification setting
-32768 to 32767 (1/100-fold)
Output pin (CN9 connector)
MO1 = Pin 9, MO2 = Pin 19, LG = Pin 1,11
Others
The D/A output for the 2-axis or 3-axis unit is also 2ch. When using the 2-axis or 3-axis unit,
always set -1 for the output data (SV061, SV062 / SP125,SP126) of the axis that is not to
be measured.
MDS-E/EH
CN9 connector
Pin
Pin
Name
Name
LG
LG
M01
M02
+2.5 [V]
0 [V]
Speed FB
Current FB
+2.5 [V]
0 [V]
+5 [V]
+5 [V]
Example of D/A output waveform
Summary of Contents for MDS-E
