4 / 47
JEP0-IL9537
[Maintenance and Inspection]
Danger
The equipment must only be operated and handled by qualified personnel. Otherwise, there are risks of
electric shock, injury, failure, malfunction, and maloperation.
Handling and maintenance of the equipment must only be carried out after gaining a thorough
understanding of the instruction manual. Otherwise, there is the risk of electric shock, injury, failure,
malfunction, or maloperation.
Do not touch any live parts, such as terminals, etc. Otherwise, there is a risk of electric shock.
Caution
When replacing the equipment, use a product of same model, rating, and specifications.
Otherwise, there is the risk of failure or fire. If any other product is to be used, the manufacturer must be
consulted.
We recommend that any tests or inspections are carried out under the following conditions, as well as
any additional conditions described in the instruction manual.
• Ambient temperature
20 ± 10°C
• Relative humidity
90% or less
• External magnetic field
80 A/m or less
• Atmospheric pressure
86 to 106 × 10
3
Pa
• Mounting angle
Regular direction ±2°
• Frequency
Rated frequency ±1%
• Waveform (in the case of AC)
Distortion factor 2% or less
Distortion
factor=
Effective value of higher harmonics only
× 100 (%)
Effective value of fundamental wave
• AC component (in the case of DC) Ripple factor 3% or less
Ripple
factor =
Max. value
– Min. value
× 100 (%)
Average value of DC
• Control power supply voltage
Rated voltage ±2%
Do not exceed the overload capacity for voltage and current. Otherwise,equipment failure or fire could
occur.
Do not clean the equipment while energised. When the cover needs to be cleaned, make use of a damp
cloth.
[Repair and modification]
Caution
When carrying out repair and/or modification, please consult with the manufacturer in advance.of
carrying out the work. We will not take any responsibility for any repair and/or modification (including
software) which has been carried out without prior consent.
[Disposal]
Caution
Disposal must take place in accordance with the applicable legislation
Summary of Contents for MELPRO CBV2 -A02S1
Page 46: ...46 47 JEP0 IL9537 ...
Page 47: ...47 47 JEP0 IL9537 ...